OpenStep 4.1 (User)/OpenStep 4.1 (User).iso/usr/standalone/sparc/Spanish.lproj/Localizable.strings

Text File | 1996-04-12 | 5.5 KB | 78 lines

"Loading OPENSTEP" = "Cargando OPENSTEP";
"Loading %s\n" = "Cargando %s\n";
"Reading OPENSTEP configuration" = "Leyendo configuracion de OPENSTEP";
"Couldn't load standalone linker; unable to load boot drivers.\n" = "Imposible cargar linker autonomo; imposible cargar controladores de arranque.\n";
"Insert file system media and press Return" = "Inserte el disco del sistema de ficheros y pulse Retorno";
"Errors encountered while starting up the computer.\n" = "Se han encontrado errores arrancando el ordenador.\n";
"Pausing %d seconds...\n" = "Parada de %d segundos...\n";
"Starting OPENSTEP" = "Arrancando OPENSTEP";
"Can't find %s\n" = "Imposible encontrar %s\n";
"Couldn't start up the computer using this floppy disk." = "No se ha podido arrancar el ordenador utilizando este disquete.";
"Error loading %s\n" = "Error cargando %s\n";
"Fat binary file doesn't contain sparc code\n" = "El fichero fat binary no contiene codigo sparc\n";
"Unrecognized binary format\n" = "Formato binario no reconocido\n";
"Error reading commands\n" = "Error leyendo comandos\n";
"Error loading section\n" = "Error cargando seccion\n";
"Read error\n" = "Error de lectura\n";
"Can't load driver %s without sarld\n" = "Imposible cargar el controlador %s sin sarld\n";
"Driver %s is larger than %d bytes and can't be loaded.\n" = "El controlador %s es mayor de %d bytes y no puede cargarse.\n";
"Error occurred while linking driver %s:\n%s" = "Se ha producido un error al enlazar el controlador %s:\n%s";
"The floppy disk in the drive contains the following SCSI adapter and
hard disk controller device drivers:\n" =
"El disquete de la unidad contiene los siguientes controladores
de dispositivo de disco duro y adaptador SCSI:\n";
"Loading driver %s\n" = "Cargando el controlador %s\n";
"Error loading driver %s\n" = "Error cargando el controlador %s\n";
"The driver was not loaded.  " = "El controlador no se ha cargado.  ";
"The driver was loaded successfully.  " = "El controlador se ha cargado correctamente.  ";
"Press Return to continue.\n" = "Pulse Retorno para continuar.\n";
"Type 1 to load a device driver from the disk in the floppy disk drive.\n" =
"Escriba 1 para cargar un controlador de dispositivo desde el disquete
de la unidad.\n";
"Type 2 to continue without loading additional device drivers.\n" =
"Escriba 2 para continuar sin cargar ningun otro controlador de dispositivo.\n";
"When you began installing OPENSTEP, you loaded the following device drivers
from a floppy disk:\n" =
"Cuando comenzo a instalar OPENSTEP, cargo los siguientes controladores
de dispositivo desde un disquete:\n";
"Insert the floppy disk that contains these device drivers.\n" =
"Inserte el disco que contiene estos controladores de dispositivo.\n";
"If you have a floppy disk with OPENSTEP device drivers that you need to use
during installation, insert the floppy disk that contains the device driver
for that device.\n" =
"Si dispone de un disquete con los controladores de dispositivo de OPENSTEP
necesarios durante la instalacion, inserte el disquete que contiene
el controlador para el dispositivo.\n";
"The following SCSI adapter and hard disk controller device drivers are
available while installing OPENSTEP:\n" =
"Los siguientes controladores de dispositivo de disco duro y
adaptador SCSI estan disponible durante la instalacion de OPENSTEP:\n";
"If you have a different kind of SCSI adapter or hard disk controller, insert
the floppy disk that contains the device driver for your device.\n" =
"Si dispone de otro tipo controlador de disco duro o adaptador SCSI,
inserte el disquete que contiene el controlador del dispositivo
correspondiente.\n";
"Searching for drivers" = "Buscando controladores";
"Couldn't find /usr/Devices\n" = "Imposible encontrar /usr/Devices\n";
"There are no device drivers on this floppy disk.\n" = "No existen controladores de dispositivo en el disquete.\n";

"Error in standalone linker executable\n" = "Error en linker autonomo ejecutable\n";
"No room in memory for config file %s\n" = "No hay espacio en la memoria para el fichero de configuracion %s\n";
"Reading config: %s\n" = "Leyendo configuracion: %s\n";
"Config file \"%s\" not found\n" = "No se encuentra el fichero de configuracion \"%s\"\n";
"System config file '%s' not found\n" = "No se encuentra el fichero de configuracion del sistema '%s'\n";
"Loading binary for %s device driver.\n" = "Cargando binario para el controlador de dispositivo %s.\n";
"Warning: No active drivers specified in system config\n" =
"Advertencia: no hay controladores activos especificados en
la configuracion del sistema.\n";
"Type the number for the device driver you want to install.\n" = "Escriba el numero del controlador de dispositivo que desea instalar.\n";
"Type %d to view a list of additional device drivers on this disk.\n" = "Escriba %d para visualizar una lista de controladores de dispositivo
adicionales de este disco.\n";
"Type %d to continue without installing a device driver from this disk.\n" = "Escriba %d para continuar sin instalar ningun controlador de dispositivo
desde este disco.\n";

"Really Install?" = "Este programa sirve para instalar OPENSTEP en el disco duro.\nNO SE TRATA DE UNA ACTUALIZACION: SE BORRARAN TODOS LOS FICHEROS DE OPENSTEP\nEXISTENTES.\n\nSi tiene ficheros en el disco duro que desea conservar, salga de este programa\ny copie la informacion que desea conservar en otro disco.\n\nEscriba 1 si esta listo para instalar OPENSTEP.\nEscriba 2 para salir del programa de instalacion.\n";

"Install Canceled" = "Instalacion cancelada.  Vuelva a arrancar el ordenador.\n";